本系統主要由檢測門、監測主機等組成。

　　1. 檢測門：分單通道或多通道按放于車間門口或公司出口。

　　2. 監測主機：主機與檢測門用專用導線邊接，當紗管(內置傳感器)進入通道

　　時，檢測門內的電磁波發生變化，被主機檢測后聲光報警。

　　二、技術參數

　　通道寬度：?jiǎn)瓮ǖ溃?50mm

　　雙通道：1500mm

　　探測高度：1600mm

　　電 源：220V±10% 50HZ

　　輸出功率：≤13W

　　外形尺寸：1600X420X48mm

　　The system is mainly composed of detection door, monitoring host and so on.

　　1. Test door: Single channel or multi-channel press on the shop door or company exit.

　　2. Monitoring host: The host and detection door with a special wire edge connection, when the yarn tube (built-in sensor) into the channel, the detection of the electromagnetic wave in the door changes, by the host detection after the sound and light alarm.

　　Second, the technical parameters

　　channel width: Single channel: 750mm

　　dual channel: 1500mm

　　detection height: 1600mm

　　power supply: 220v±10% 50HZ

　　output power: ≤13w

　　Dimensions: 1600x420x48mm